SLR Magic Anamorphot Adapter 1.33x40 with built in Rangefinder is a compact, anamorphic adapter designed for cinematography and video. The adapter has a native 52mm rear thread. As such it is only suitable for a select range of lenses which have a front element size of 40mm or less.
Anamorphic lenses Increases image resolution and detail by squashing / compressing the image horizontally by a factor of 1.33x to allow maximum utilisation of the cameras' sensor. Use of anamorphic lenses therefore require subsequent stretching in post-production or at projection. Intended for use with shooting at 16:9, bringing the intended output to near a standard 2.35:1 cinemascope wide format with a higher resolution than simply letter-boxing the image in camera. The lens features a built in Rangefinder, for one dial focusing adjustment control.
NOTE: Designed to work exclusively with the SLR Magic HyperPrime CINE 25mm T0.95 III Micro Four Thirds at f2.8 or above and the SLR Magic 50mm f/1.1 E-mount lens in Super35 or APS-C mode only (at f2.8 or above).
Compatible Cameras: Micro Four Thirds and E-mount s35 or APS-C. Focus range 4 feet to infinity.
May be compatible with other lenses, but would be on a trial and error basis and untested. Front Element Glass of less than 40mm required, and focal range of 25-75mm (estimated).
SLR Magic Anamorphot Adapter 1.33x40 with built in Rangefinder, Lens cap, Lens rear cap.
|Lens model:||SLR Magic Anamorphot Lens Adapter 1.33x40|
|Mount:||52mm Filter thread|
|Format:||S35 / MFT / APS-C|
|Focal Length:||1.33x Anamorphic squeeze|
|Equivalent focal length:||-|
|Angle of view:||-|
|Minimum focusing distance:||4ft - infinity|
|Dust and moisture resistant:||No|
|Other special features:||Anamorphic|
|Included accessories:||Lens caps, instruction card|
|Filter size:||82mm front, 52mm rear|
You need to log in to ask a question.